Jagoran Kwatancen DTF Powder Shaker: D300 vs D650 vs D800 vs H650E vs H650 Pro vs H6505 vs H650L vs H1600 (2026)

Amsa da sauri:AGP ya yi8 DTF foda shaker model sun kasu kashi biyu layin samfur.TheD-jerin (D300, D650, D800)m ne kuma mai sarrafa maɓalli, an gina shi don haɗawa tare da firintar DTF mai faɗi ɗaya don farawa da ƙananan kantuna. TheH-jerin (H650E, H650 Pro, H6505, H650L, H1600)yana amfani da isar da bel, dumama matakai da yawa, da PLC ko sarrafa allo don samar da girma mai girma.

Samfurin da ya dace ya dogara da abubuwa uku:Faɗin firinta na DTF, ƙarar kayan aikin ku na yau da kullun, da ƙarfin lantarki na shagon ku.A ƙasa akwai cikakken kwatancen ƙayyadaddun ƙayyadaddun ƙayyadaddun ƙayyadaddun tsarin, bambancin tsarin tsakanin layin samfura biyu, da shawarwarin kai tsaye ga kowane nau'in kasuwanci.

Masu girgiza foda suna kama da kama daga waje, amma bambance-bambancen tsayin dumama, zana wutar lantarki, da matakin sarrafa kansa kai tsaye yana shafar daidaiton bugawa da kayan aikin yau da kullun - siyan girman da ba daidai ba don ƙarar ku shine ɗayan kuskuren gama gari (kuma tsada) sabbin shagunan DTF.

Me yasa Powder Shaker ya fi abin da mutane ke tsammani

DTF foda shaker yana shafa kuma yana warkar da hoda mai narkewa mai zafi akan farar tawada da aka buga.fim din PET. Idan ba tare da shi ba, dole ne a shafa foda kuma a girgiza shi da hannu - a hankali, rashin daidaituwa, kuma ba zai yiwu a wuce ƴan guntu ba a rana. Na'urar tana sarrafa matakai uku a cikin fasfo ɗaya: ƙurar foda a ko'ina a cikin fim ɗin, dumama da warkarwa, da sanyaya fim ɗin don a shirye don canja wurin latsa zafi.

Kowane samfurin AGP yana yin wannan ainihin aikin. Abin da ke canzawa tsakanin samfura shineFaɗin ciyarwa, matakan dumama, tsarin sarrafawa, da kayan aiki- kuma wannan shine ainihin abin da ke ƙayyade ko shaker ya dace da ɗakin studio na gida, kantin girma, ko filin masana'anta.

D-Series vs H-Series: Babban Bambancin

Idan kuna farawa kawai, ko kuna gudanar da ƙaramin sigar DTF guda ɗaya, jerin D yawanci ya dace. Idan kuna ciyar da layin samarwa mai aiki ko gudanar da fim mai faɗi duk rana, an gina jerin H don wannan nauyin.

Cikakken Bayani Kwatancen

Duk samfuran suna gudana akan 220V kuma suna tallafawa duka fim ɗin PET da takarda PP azaman kafofin watsa labarai na canja wuri.

Yadda za a Zaba: Mataki-mataki

1

Daidaita faɗin zuwa firinta na DTF

Faɗin ciyarwar foda ɗin ku yakamata yayi daidai da faɗin bugu naku - firinta na 600mm yana buƙatar shaker aji 600mm (D650, H650E, H650 Pro, H6505, ko H650L), ba mai faɗi ko kunkuntar ba. Faɗin da bai dace ba yana zubar da fim da sararin bene ba tare da ƙara iya aiki ba.

2

Yi ƙididdige ƙarar samar da ku na yau da kullun

Ƙananan ƙara (a ƙarƙashin ~50 guda /rana): D-jerin ya isa. Tsakanin girma (50-200 guda /rana): H650E ko H650 Pro yana ƙara ɗaukan atomatik da ƙarin dumama. Babban girma (200+ guda / rana, ci gaba da gudana): H6505 ko H650L, wanda aka gina don ci gaba da aiki na bel.

3

Duba ƙarfin lantarki na shagon ku

Zane wutar lantarki daga kusan 800W (D300, kowane bututu) har zuwa 12KW (H6505). Kafin zabar samfurin H-jerin mai ƙarfi, tabbatar da rukunin wutar lantarki na iya tallafawa ƙarin kaya - wannan babban sa ido ne wanda ke jinkirta shigarwa.

4

Yanke shawarar nawa aikin atomatik kuke so

Samfuran D-jerin suna amfani da sarrafawar hannu kuma, a mafi yawan lokuta, ɗaukan hannu. H650E da sama suna ƙara ɗauka da gyara ta atomatik. H650 Pro da H1600 suna ƙara cikakken ikon sarrafa allon taɓawa na PLC da ginanniyar tsabtace iska don iska mai tsabtar shagon yayin ci gaba da gudana.

Wanne Samfurin Yayi Daidai da Kasuwancin ku?

Farawa kawai tare da firinta A3 DTF → D300.Karamin sawun ƙafa, mafi ƙarancin farashi na jigilar kaya, sarrafa maɓalli mai sauƙi - ya isa don tabbatarwa da keɓance ƙanana.

Ƙananan shago yana gudanar da firinta na 60cm DTF akan kasafin kuɗi → D650.Dabarun dumama matakan 3 iri ɗaya kamar jerin H-jeri mai tsada, a cikin ƙaramin ƙaramin chassis mai rahusa tare da nunin LED maimakon cikakken allon taɓawa.

Bukatar nisa 80cm ba tare da sawun masana'antu ba → D800.Ƙirar D-jerin ƙirar ƙira ɗaya, wanda aka haɓaka don fim mai faɗi, har yanzu tare da sake amfani da foda ta atomatik da gyaran atomatik.

Shagon girma wanda ke son ɗauka ta atomatik amma ba cikakken tsarin PLC ba → H650E.Dumama mataki biyu akan yanki mai dumama 83cm, gyara atomatik, da ɗaukar hannu mara hannu - mataki daga jerin D ba tare da girman ko farashin tsalle zuwa Pro.

Samar da mai da hankali kan inganci wanda ke son sarrafa PLC da iska mai tsabtar shago → H650 Pro.Dumama mataki uku, allon taɓawa na harshe da yawa PLC, da ginanniyar tsabtace iska sun sanya wannan zaɓi na 60cm mafi hannun hannu.

Samar da bel mai girma yana buƙatar mafi girman tsayin dumama a cikin aji 60cm → H6505 ko H650L.Dukansu suna amfani da isar da bel da ɗaukar tashin hankali ta atomatik. H6505 yana gudanar da ƙarin iko (12KW) a cikin tsayin dumama 400mm + 1200mm da aka raba; H650L yana gudanar da tsayin dumama 1200mm guda ɗaya a ƙaramin ƙarfin wuta (5KW) - zaɓi mai kyau inda ƙarfin lantarki ya iyakance.

Factory-sikelin aiki bugu fadi-format canja wuri → H1600.Samfurin kawai wanda aka gina don kafofin watsa labaru na 1600mm, tare da dumama 3-mataki, ginanniyar tsabtace iska, da sarrafa nau'ikan yare na PLC don ci gaba da tafiyar da masana'antu.

Tambayoyin da ake yawan yi

Tambaya: Menene bambanci tsakanin AGP's D-jerin da H-jerin foda shakers?

A: D-jerin (D300, D650, D800) karami ne kuma ana sarrafa maɓalli, an tsara shi don haɗawa da firintar DTF mai faɗi ɗaya don ƙananan ayyuka. H-jerin (H650E, H650 Pro, H6505, H650L, H1600) yana amfani da isar da bel, ƙarin matakan dumama, da PLC ko kula da allon taɓawa don samar da girma mai girma.

Tambaya: Wanne foda shaker zan saya don 60cm DTF printer?

A: Kowanne na D650, H650E, H650 Pro, H6505, ko H650L zai dace da firinta 60cm. Shagunan da suka san kasafin kuɗi yawanci suna karɓar D650; shagunan da ke son ƙarin sarrafa kansa sama da H650E; shagunan da ke son sarrafa PLC da tsarkakewar iska suna ɗaukar H650 Pro; Ayyukan ciyar da bel mai girma suna ɗaukar H6505 ko H650L.

Tambaya: Shin AGP foda shakers suna sake yin amfani da foda mara amfani?

A: Ee - kowane samfuri a cikin jeri (D300, D650, D800, H650E, H650 Pro, H6505, H650L, H1600) ya haɗa da atomatik foda-sake yin amfani da tsarin ko dawo da tsarin don rage sharar gida da kayan tsada.

Tambaya: Wane irin wutar lantarki ne waɗannan inji ke buƙata?

A: Duk samfura takwas suna aiki akan 220V. Zane wutar lantarki ya fito daga kusan 800W (D300, kowane bututu mai dumama) har zuwa 12KW (H6505), don haka yana da daraja tabbatar da ƙarfin lantarki na shagon ku kafin zaɓar samfurin H-jerin mafi girma.

Tambaya: Zan iya amfani da takarda PP maimakon fim ɗin PET a cikin waɗannan masu girgiza foda?

A: Ee, duk nau'ikan nau'ikan guda takwas suna goyan bayan takardar PP ban da fim ɗin PET don canja wurin DTF.

Kammalawa

Zaɓin mai girgiza foda ba game da ɗaukar samfurin "mafi kyau" ba ne - game da daidaita nisa, girma, da matakin sarrafa kansa zuwa yadda shagon ku ke gudana a zahiri. Fara da faɗin firinta, sannan girman sama ko ƙasa bisa ƙididdige yanki na yau da kullun da yadda kashe hannu da kuke son aiwatarwa ya kasance. Shagunan da suka sami wannan wasa daidai suna guje wa kurakurai biyu na yau da kullun: yawan biyan kuɗi don ƙarfin da ba sa amfani da su, ko ƙulla firinta mai sauri tare da girgizar ƙasa.

Idan ba ku da tabbacin wane samfurin ya dace da saitin ku,tuntuɓi ƙungiyar AGPtare da samfurin firinta da ƙarar yau da kullun don shawarwarin kai tsaye.

Ba Tabbatar da Wanne Foda Shaker Yayi Daidai da Firintar ku ba?

An ƙera layin AGP's Powder Shaker don haɗa kai tsaye tare da firintocin AGP DTF masu faɗi ɗaya, don haka tsayin dumama da kayan aiki sun dace daga farkon.

Duba AGP Powder Shaker Lineup →