Karfe

Karfe yana ɗaya daga cikin mafi yawan buƙatu - kuma mafi lada - a cikin bugu na dijital. Fuskar sa mai santsi, mara fa'ida tana ba da daki-daki daki-daki da launi mai ban sha'awa, amma kuma yana sa manne tawada da wahalar cimma fiye da kan masana'anta ko takarda.UV buguyana warware wannan ta hanyar warkar da tawada nan take akan tuntuɓar juna, ƙirƙirar haɗin gwiwa mai wuya, mai dorewa ba tare da buƙatar canja wurin zafi ko tsayin bushewa ba. Wannan jagorar ya ƙunshi waɗanne ƙarfe ne ke aiki mafi kyau, yadda za a shirya su, da kuma inda ake amfani da ƙarfe-bugun UV ta kasuwanci.

Menene Buga UV akan Karfe kuma Yaya Yayi Aiki?

UV buguyana amfani da firinta mai faffaɗa wanda ke shafa tawada kai tsaye a saman saman ƙarfe, sannan ya warkar da shi nan take da fitilun UV LED yayin da yake bugawa. Ba kamar sublimation ba, wanda ke rina kayan da kansa kuma yana buƙatar suturar polymer, bugu na UV yana haɓaka yadudduka na tawada - yawanci farin tushe na farko, sannan CMYK mai cikakken launi ya biyo baya - kai tsaye a saman ƙarfe, yana samar da harsashi mai ƙarfi, warkewa wanda ke ɗaure zuwa saman.

Saboda tawada yana warkar da lokacin da ake amfani da shi, babu lokacin bushewa, babu haɗarin ɓarna yayin sarrafawa, kuma babu murɗawar zafi - yin bugu na UV musamman don ƙaƙƙarfan sassa na ƙarfe, masu zafin zafi, ko daidaitattun kayan ƙarfe.

Wanne Filayen Ƙarfe ne Mafi Aiki don Buga UV?

• Aluminum- mafi UV-buga-friendly karfe; santsi, mai nauyi, kuma yana karɓar tawada da tsafta, musamman a cikin rufi ko sifar anodized
• Bakin karfe- mai ɗorewa kuma sanannen ga tumblers da sassan masana'antu, amma ƙarancin ƙarfin sa yana nufin yana buƙatar magani na farko ko harshen wuta don tawada ya kama yadda ya kamata.
• Karfe mai rufi / foda mai rufi- abin dogara idan dai murfin ya warke sosai kafin bugawa
• Brass da tagulla- Za'a iya bugawa tare da tsaftacewa a hankali, ko da yake saman su oxidize na tsawon lokaci, wanda zai iya raunana mannewa idan ba a magance shi ba
• Titanium- mai amfani don aikace-aikacen alkuki, amma ƙasa da kowa kuma yawanci yana buƙatar irin wannan riga-kafin magani zuwa bakin karfe

Ta yaya kuke Shirya Karfe don Buga UV?

Shirye-shiryen shimfidar wuri shine babban al'amari guda ɗaya da ke raba bugu wanda ke ɗaukar shekaru da wanda ke barewa a cikin makonni:

1. Girma:Tsaftace karfen sosai don cire mai, sawun yatsa, da ragowar masana'anta - ko da gurɓataccen haske na iya toshe manne tawada.
2. Ƙarƙashin haske (idan an buƙata):Ƙarƙashin haske yana ƙãra makamashin saman saman a goge ko slick karafa, yana taimakawa tawada mafi kyau.
3. Aiwatar da firamare ko mai tallata mannewa:Musamman mahimmanci ga bakin karfe, tagulla, jan karfe, da titanium - bakin ciki, har ma da gashi yana inganta ƙarfin haɗin gwiwa na dogon lokaci.
4. Tsaya da daidaitawa:Aminta yanki na ƙarfe akan gadon firinta ta amfani da jig ko kayan aiki don kiyaye shi lebur da hana motsi yayin bugu da yawa.

Menene Tsarin Buga Ƙarfe-Ƙara ta UV?

1. Shirya fayil ɗin ƙira a cikin yanayin launi na CMYK a babban ƙuduri don guje wa pixelation akan dubawa kusa.
2. Load da ƙira a cikin software na RIP na UV kuma saita tsari na Layer - tushen farin tawada da farko don duhu ko ƙarfe mai haske, sannan launi.
3. Amintaccen yanki na ƙarfe mai lebur akan gadon bugawa ta amfani da jigs ko kayan aiki don daidaitaccen wuri mai maimaitawa.
4. Gudanar da bugun gwaji don tabbatar da daidaiton launi, daidaitawa, da manne tawada kafin cikakken samarwa.
5. Buga cikakken zane - fitilar UV tana warkar da kowane Layer tawada nan take yayin da ake shafa shi.
6. Aiwatar da zaɓi na zaɓi na kariya mai kariya don guntun da aka fallasa ga mu'amala mai nauyi ko yanayin waje.

Ana Buga UV akan Karfe Mai Dorewa A Waje?

Ee. Da zarar an warke, UV tawada yana samar da wani yanki mai wuya, mai hana ruwa wanda ke ƙin dushewa, ƙazanta, da danshi - wanda shine dalilin da ya sa UV-bugu na aluminum da bakin karfe ana amfani da su sosai don alamar waje, alamar abin hawa, da abubuwan gine-gine. Ƙarfe-bugun UV na cikin gida yawanci suna nuna ƙarancin lalacewa akan lokaci, tunda suna guje wa bayyanar UV/ hasken rana kai tsaye da hawan keke.

Ina Ana Amfani da Buga UV akan Karfe?

• Alamar waje da na cikin gida- alamun kasuwanci, alamar jagora, da nunin gano hanyoyin da ke buƙatar jure yanayin
• Alamomin suna da faranti na bayanai- Gane kayan aiki, lambobin serial, da alamar kulawa a cikin saitunan masana'antu
• Kyaututtuka da kayayyaki masu alama- kofuna, plaques, da kyaututtuka na kamfani waɗanda ke amfana daga ƙaƙƙarfan ƙarancin ƙarfe
• Katunan kasuwanci na ƙarfe da alamun kadara- samfuran ƙira masu ƙima tare da cikakken zane-zane mai launi ko lambobin QR
• Kayayyakin masu amfani- Tumblers bakin karfe, sarƙoƙin maɓalli na aluminium, da bayan wayar ƙarfe don keɓaɓɓen kyauta da dillali

UV Printing vs. Sublimation on Metal - Wanne Ya Kamata Ka Zaba?

Duk hanyoyin biyu na iya samar da launi akan karfe, amma suna aiki da bambanci sosai. Buga UV yana warkar da tawada kai tsaye a saman saman - yana da sauri, yana aiki akan karafa marasa rufi da launuka, kuma yana samar da filla-filla, daki-daki. Sublimation yana yin rini na musamman na polymer ɗin da aka gasa akan ƙarfe, yana ba da slim, ƙarin kamanni, amma yana aiki ne kawai akan ɓangarorin da aka riga aka rufa kuma gabaɗaya yana faɗuwa cikin sauri fiye da tawada UV da aka warke.

Teburin Dacewar Karfe

UV Printing vs. Sublimation on Metal

Kammalawa: Hanyar Amintacciya don Alama da Ƙawata Karfe

Buga UV yana ba kasuwancin sauri, dorewa, da cikakken hanyar yin ado karfe - daga alamar waje wanda ke buƙatar tsira shekaru da yawa na bayyanar yanayi, zuwa daidaitattun sunayen masana'antu, zuwa samfuran ƙira mai ƙima. Nasarar tana zuwa ne don dacewa da nau'in ƙarfe mai dacewa tare da shirye-shiryen da ya dace, tun da mannewa - ba firinta ba - yawanci shine abin da ke ƙayyade tsawon lokacin bugawa.

AGP yana ba da ƙwararruUV flatbed printersdon karfe, acrylic, gilashin, itace, da sauran kayan aiki masu wuyar gaske. Tuntuɓi ƙungiyarmu don nemo daidaitaccen tsarin kayan aiki don alamar ku, lakabin masana'antu, ko layin samar da alamar ƙarfe.

FAQ: Buga UV akan Tambayoyin Karfe

Shin za ku iya buga UV kai tsaye akan ƙarfe mara tushe?
Ee, ko da yake daɗaɗɗen bakin karfe, tagulla, da jan ƙarfe gabaɗaya suna buƙatar mai haɓakawa ko mai haɓakawa da farko, yayin da mai rufi ko anodized aluminum ana iya buga shi tare da ƙaramin shiri.

Ana buga UV akan ƙarfe mai hana ruwa?
Ee. Da zarar an warke, UV tawada yana samar da wani nau'i mai wuya, mai rufewa wanda ke tsayayya da ruwa, yana sa ya dace da alamar waje da kayan aikin masana'antu da aka fallasa ga abubuwa.

Har yaushe karfen da aka buga UV zai yi a waje?
Tare da ingantaccen shiri da tawada mai inganci, alamar karfen da aka buga ta UV yawanci yana ɗaukar shekaru da yawa a waje kuma yana da tsayi sosai a cikin gida, kodayake ainihin tsawon rayuwar ya dogara da bayyanar rana da yanayin yanayi.

Kuna buƙatar farin tawada don bugawa akan ƙarfe?
Ee, don duhu ko haske na ƙarfe. Farar farar tushe na tawada ana buga shi don toshe launi na ƙarfe, yana tabbatar da launukan da ke saman suna bayyana masu haske da daidaito maimakon surutu.

Menene bambanci tsakanin bugu UV da sublimation akan karfe?
Buga UV yana warkar da tawada kai tsaye akan saman ƙarfe kuma yana aiki akan tsiran alade ko mai rufi tare da daki-daki mai kaifi da juriya mai ƙarfi. Sublimation dyes wani polymer shafi gasa uwa karfe da kuma bukatar pre-mai rufi blanks, gaba ɗaya fade sauri a kan lokaci.

Za a iya amfani da bugu na UV akan filayen ƙarfe masu lanƙwasa?
Ee, tare da abin da aka makala na jujjuya, firintocin UV na iya nannade zane mai cikakken launi a kusa da abubuwan ƙarfe masu lanƙwasa kamar tumblers da sassan silindi a cikin fasfo ɗaya.

Wanne karfe ne ya fi sauƙi don farawa da shi don buga UV?
Aluminum, musamman a cikin nau'i mai rufi ko nau'in anodized, shine ƙarfe mafi kyawun mafari - yana da santsi, mai nauyi, kuma yana karɓar tawada UV da tsafta tare da ƙaramin shiri.