Matsalolin Buga DTF & Magani: Cikakken Jagorar Shirya matsala na 2026

Kusan kowace matsala ta bugun DTF - tawada mai laushi, launuka mara kyau, fim ɗin da ba zai tsaya ba, kwafin da ya fashe bayan ƴan wanke-wanke - yana komawa zuwa ɗaya daga cikin tushen tushe guda huɗu:kan bugu, tawada, fim, ko latsa zafi/ saitunan warkewa. Da zarar kun san wanene daga cikin hudun ya yi kuskure, gyaran yawanci ana daidaitawa na mintuna biyar, ba sabon injin ba. Wannan jagorar yana tafiya cikin 14 mafi yawan matsalolin bugu na DTF, abin da ke haifar da kowannensu, da kuma yadda za a gyara shi - da yadda za a fada lokacin da batun saiti ne tare da batun kayan aiki da ke buƙatar mai fasaha.

Amsa da sauri:Yawancin matsalolin bugawa na DTF (kimanin 70% na tikitin tallafi da muke gani) sun fito ne daga abubuwa uku: na'urar buga wanda ba a tsaftace ba ko ba a buga shi ba a cikin kwanaki da yawa, farin tawada wanda ya daidaita kuma ya taurare a cikin layin tawada, ko kuma zafi mai zafi wanda ke gudana a waje da 300-325 ° F (150-165 ° C) yana buƙatar mafi yawan taga DTF. Bincika waɗannan guda uku da farko kafin ɗaukan firinta ya karye.

Teburin Bincike Mai Sauri

Daidaita alamar ku zuwa dalilin da ya sa, sannan ku tsalle zuwa sashin da ya dace da ke ƙasa don cikakken gyara.

1. Matsalolin bugawa & Tawada

1.1 Rufe kan Nozzles (Banding, Race Lines)

Wannan ita ce ƙarar firinta na DTF guda ɗaya, kuma kusan koyaushe ana iya hana shi. Dukansu launi da farin tawada na iya bushewa a cikin tashoshi na bututun ƙarfe idan firinta yana zaune ba aiki - ko da dare a cikin busasshen shago mai kwandishan.

• Gyara:Gudun duban bututun ƙarfe, sannan 2-3 na zagayowar tsaftacewa ta atomatik. Idan har yanzu layukan sun ɓace, jiƙa kan bugu tare da maganin tsaftacewa na tsawon mintuna 15-30 kafin sake gwadawa.
• Hana shi:Buga wani abu - ko da ƙaramin ƙirar gwaji - kowane kwanaki 1-2. Na'urorin buga takardu waɗanda ba a yi amfani da su ba a ƙarshen mako sune mafi yawan tushen tushen koke-koke a safiyar Litinin.

1.2 Farar Tawada Matsala & Taurara (Grey, Patch Prints)

Farin tawada DTF an ɗora shi da pigment na titanium dioxide, wanda ya fi tawada CMYK nauyi kuma ya zauna zuwa kasan tanki da layin tawada idan ba a zagaya ba. Da zarar ya taurare, zai iya toshe tashar har abada.

• Gyara:Ki girgiza farar kwalbar tawada sosai kafin kowane sake cika. Yi amfani da ginanniyar ink ɗin tawada da ke kewayawa/aikin tashin hankali kullum idan yana da ɗaya.
• Hana shi:Zaɓi firinta tare da tsarin motsa jiki na farin tawada ta atomatik ko rarrabawa - wannan shine ɗayan manyan bambance-bambancen ingancin rayuwa tsakanin matakin shigarwa da samar da firintocin DTF, kuma yana da daraja a bincika a cikin namu.Jagorar siyan firintocin DTF.

1.3 Tawada ko zubar jini

Yawancin lokaci tawada ba ta bushe sosai ba kafin a sarrafa fim ɗin ko kuma a raunata kan littafin ɗaukar hoto.

• Gyara:Ƙara na'urar bushewa/jin zafi kaɗan, ko rage saurin bugawa don tawada ya sami ƙarin lokacin saita kafin fim ɗin ya motsa.
• Hana shi:Sanya filin aikin ku kusa da 70-77 ° F (21-25 ° C) tare da matsakaicin zafi - iska mai ɗanɗano sosai yana rage bushewar tawada sosai.

2. Matsalolin ingancin Hoto & Launi

2.1 Rarrabe ko Tausayi

Wanda ya haifar da ƙananan ƙirar ƙira, rashin daidaituwar kai, ko saita saurin bugawa da tsayi don ƙimar ƙira.

• Gyara:Yi amfani da fayilolin tushen 300 DPI. Gudanar da daidaitawar kan bugu / gwajin daidaitawa. Rage saurin bugawa don ƙirar ƙira mai kyau.

2.2 Rashin daidaiton Launi Tsakanin Fita

Kusan ko da yaushe RIP software / batun bayanin martabar launi maimakon laifin hardware.

• Gyara:Tabbatar cewa an loda madaidaicin bayanin martabar launi na ICC don rukunin tawada da nau'in fim ɗin ku. Sake daidaita saitunan launi idan kwanan nan kun canza alamar tawada ko mai samar da fim.

2.3 Banding (Layukan Tsaye Na Ganuwa)

Matakai daga toshewa mai sauƙi - wannan yawanci haɗuwa ne na toshe haske da ƙididdige ƙimar wucewa mara kyau a cikin software na RIP.

• Gyara:Tsaftace madanni da farko. Idan bandeji ya ci gaba, ƙara ƙimar wucewa (yanayin ingancin bugawa) a cikin software na RIP ɗinku, wanda ke shimfiɗa ƙarin tawada akan kowane layi kuma yana ɓoye ƙarancin bututun ƙarfe.

3. Fim & Matsalolin Canja wurin

3.1 Wrinkling Fim Lokacin Buga

Yawanci a tsaye wutar lantarki ko rashin daidaituwar tashin hankali akan abincin fim/ ɗauka rollers.

• Gyara:Shigar ko duba sandar anti-static. Sake tayar da rollers ɗin fim ɗin don haka fim ɗin ya ci gaba da daidaitawa.

3.2 Buga kan Buga (Bugawa mai ƙarfi, Tuntuɓar Jiki Tare da Fim)

Yana faruwa a lokacin da fim ɗin ba ya zaune a kwance, ko kuma an saita tsayin tazarar kai da ƙasa sosai don kaurin fim ɗin da ake amfani da shi.

• Gyara:Sake daidaitawa kuma sake kunna fim ɗin. Bincika saitin tsayin kai yayi daidai da ainihin kaurin fim ɗinku - fim mai kauri ko naƙasa yana buƙatar tazara mafi girma.

3.3 Rashin Kwasfa / Zane Ba Zai Saki Tsabtace

Wannan sau da yawa ba matsalar firinta ba ce kwata-kwata - rashin daidaito ne tsakanin nau'in fim da hanyar bawo da ake amfani da su.

• Gyara:Tabbatar ko fim ɗin ku nebawo mai zafikokwasfa mai sanyikuma bi wannan hanyar daidai - bawon fim ɗin bawo mai sanyi yayin da yake da dumi shine # 1 dalilin ƙira yaga ko barin ragowar. Duba cikakken bayanin mu a cikiJagoran Fim na DTF: Kwasfa mai zafi vs Sanyi bawo.

3.4 Farin Tawada Mai Fassara akan Tufafin Duhu

• Gyara:Ƙara farin tawada / yadudduka a cikin software na RIP - duhu, yadudduka masu laushi gabaɗaya suna buƙatar farar ƙasa mai nauyi fiye da yadudduka masu haske.
• Hana shi:Ajiye fim ɗin a wuri mai sanyi, busasshiyar nesa da hasken rana; ƙasƙantar da fim yana sha tawada marar daidaituwa.

4. Magance & Matsalolin Latsa Zafi

4.1 Buga Cracks ko Fade Bayan 'Yan Wanke

Kusan koyaushe ba a warkewa ba - foda mai mannewa bai cika narke ba kuma yana ɗaure kafin a yi amfani da ƙirar.

• Gyara:Ƙara yawan zafin jiki na tanda ko ɗan lokaci kaɗan, sannan ku yi gwajin shimfiɗa a kan guntun guntun: cikakkiyar foda ya kamata ya zama mai sheki kuma ya shimfiɗa ba tare da tsagewa ba kafin kuyi cikakken tsari.

4.2 Canja wurin Bawon Kashe Fabric

Galibi matsalar saitin latsa zafi, ba matsalar fim ko tawada ba.

• Gyara:Nuna 300-325 °F (150-165 °C), matsa lamba mai matsakaici, na 10-15 seconds - sannan duba takamaiman takaddar fim ɗin ku, tunda ainihin lambobi sun bambanta ta wurin masana'anta. Pre- danna rigar don 3-5 seconds na farko don cire danshi, wanda ke inganta mannewa sosai.

4.3 Maganin rashin daidaituwa a Gaba ɗaya Zane

• Gyara:Bincika wuraren zafi masu zafi a kan farantin ɗinku na zafin rana, ko canza zuwa tanda mai warkarwa don ƙarin madaidaicin rarraba zafi a cikin manyan ƙira ko launuka masu yawa.

Lokacin Matsalar Hardware ne, Ba Matsalolin Saiti ba

Yawancin batutuwan da ke sama an gyara su tare da zagayowar tsaftacewa ko gyare-gyaren saiti. Amma idan kun yi aiki ta hanyar gyare-gyaren da suka dace kuma matsalar iri ɗaya ta ci gaba da dawowa, yana iya yin nuni ga sawa kayan masarufi maimakon abubuwan da ake amfani da su ko software:

• Printhead kai ƙarshen rayuwa- printheads wani bangare ne na lalacewa tare da ƙimar rayuwa; yawan toshewa wanda tsaftataccen zagayowar baya warwarewa alama ce ta farko ta gama gari. MuKwatanta Shugaban Buga DTF: XP600 vs i1600-A1 vs i3200-A1yana rushe tsawon rayuwar da ake tsammani da tsadar kowane kai don ku san abin da za ku yi kasafin kuɗi.
• Kuskure damper- kumfa mai dagewa a cikin layin tawada ko da bayan priming yawanci yana nufin damper yana buƙatar maye gurbin.
• Abubuwan dumama mara daidaituwa- idan sakamakon warkewa ya bambanta a ko'ina cikin farantin guda ɗaya a saitunan iri ɗaya, maɓallin zafi ko na'urar dumama tanda na iya buƙatar sabis.

Idan kai abokin ciniki ne na AGP kuma gyara matsala bai warware matsalar ba, ƙungiyar fasaharmu za ta iya taimaka maka ka bambanta tsakanin batun wadata da batun kayan aiki kafin kashe kuɗi akan sassan da ba ku buƙata -tuntuɓi tallafi a nan.

Gina Al'ada Mai Hana Mafi Yawan Wannan

Kusan kowace matsala a cikin wannan jagorar tana da sauƙin hanawa fiye da gyara. Idan ka buga kullun, kiyaye farin tawada naka yana yawo, kuma tsaftace nozzles akan jadawalin maimakon kawai lokacin da wani abu ya ɓace, za ka guje wa yawancin waɗannan batutuwa gaba ɗaya. Don cikakkun ayyukan yau da kullun /mako-mako/ na yau da kullun, duba muJerin Takaddun Kula da Firintocin DTF.

Tambayoyin da ake yawan yi

Me yasa firinta na DTF baya buga farin tawada?

Farin tawada ba bugu kusan ko da yaushe yana faruwa ne ta hanyar daidaitawa ko taurin pigment yana toshe tashoshin bututun ƙarfe, tunda barbashi na titanium dioxide sun fi tawada CMYK nauyi kuma suna nutsewa idan ba a tayar da su akai-akai ba. Girgiza kwalban tawada, gudanar da aikin zagayawa / aikin tashin hankali, kuma tsaftace kan bugu tare da zagayowar 2-3; idan tashar ta cika taurin, jiƙa tare da bayani mai tsabta don minti 15-30.

Me yasa bugu na DTF ke fashe bayan wanka?

Fatsawa bayan wankewa yawanci yana haifar da rashin warkewa - foda mai zafi mai narkewa bai cika narke ba yayin matakin warkewa, don haka canja wurin bai taɓa haɗawa da masana'anta yadda yakamata ba. Ƙara lokacin warkar da tanda ko zafin jiki kuma gudanar da gwajin shimfiɗa a kan samfurin yanki kafin a warke cikakken tsari.

Wane zazzabi zan saita latsa zafi na don canja wurin DTF?

Yawancin fina-finai na DTF suna canjawa da kyau a 300-325 °F (150-165 ° C) tare da matsakaitan matsakaita na daƙiƙa 10-15, kodayake ainihin lambobi sun bambanta da alamar fim kuma yakamata a duba su akan takamaiman takaddar fim ɗin.

Sau nawa zan iya tsaftace madafan DTF dina?

Gudun duban bututun ƙarfe kafin kowane zaman bugawa, da cikakken sake zagayowar tsaftacewa aƙalla mako-mako koda tare da amfanin yau da kullun. Firintocin da ke zaune ba su aiki fiye da kwanaki 2-3 ya kamata a koyaushe a tsaftace su kafin bugu na gaba don hana busasshen tawada daga taurare a cikin tashoshi.

Me yasa bugun DTF dina ya bushe?

Ana haifar da kwafin blurry ta hanyar fayilolin tushen ƙananan ƙuduri (ƙasa da 300 DPI), madanni mara kyau, ko saurin bugawa da aka saita da tsayi don matakin daki-daki a cikin ƙira. Sake daidaita kan firinta kuma rage saurin bugun don aikin zane mai cikakken bayani.

Har yanzu makale a kan matsala wannan jagorar bai gyara ba?
Yi magana da ƙungiyar fasaha ta AGP - muna kera firinta, don haka yawanci za mu iya gaya muku a cikin saƙo ɗaya ko gyara saituna ne ko batun sassa.
Tuntuɓi Support | Nemo Firintocin DTF