Sida loo dhiso xaashida baandada DTF: Cabbirka, Qaabka & Hagaha Buulka (2026)
Jawaab degdeg ah:Xaashiyaha baandada DTF waa hal xaashi oo filim wareejin ah oo ay ka buuxaan nashqado badan si aad u daabacdo, u daawayso, oo aad riixdo xawilado badan halkii orodba halkii aad naqshad kasta si gaar ah u daabacan lahayd. Deji ballaca shiraaca si uu u dhigmo balaadhka daabacaadda dhabta ah (ma aha 22" aad ku aragto in lagu soo xigtay adeegyada daabacaadda-dalabka), ku nakhshad 300 DPI oo ah qaab PNG oo hufan, ka tag 0.25"-0.5" inta u dhaxaysa naqshadaha, iyo koox farshaxan isku mid ah oo isku mid ah xaashi isku mid ah si looga fogaado filimka khasaaray.
Haddi aad midba mar dalbanaysay xawilaad -ama aad u diraysay faylal adeega xaashida gaangiska - waxaad kaga tagaysaa lacag miiska dushiisa. Waraaqaha baandada ayaa ah kabaalka ugu weyn ee hoos u dhigaya kharashkaaga wareejin kasta, sababtoo ah filimka, khad, iyo wakhtiga daawaynta ayaa ah kharashka dhabta ah ee wax soo saarka DTF, iyo xaashi si fiican loo soo buuxiyay ayaa kharashyadaas ku faafisa daabacado badan. Hagahan waxa uu si sax ah u dhex marayaa sida loo cabbiro, loo dhigo, oo buul u yeesho xaashi gaangiska - oo ay ku jirto sida loo sameeyo agagaarkaballaca daabacahaagahalkii ay ka heli lahaayeen qaababka go'an ee casharrada intooda badani waxay qaataan.
Waa maxay xaashida baandada DTF?
Xaashida baandooyinka waa qaabayn isku daraysa naqshado badan - cabbirro kala duwan, macaamiil kala duwan, alaabooyin kala duwan - hal qayb oo filim DTF ah oo joogto ah. Halkii aad ku daabici lahayd calaamad 4-inch ah oo xaashideeda ah oo aad iska lumin lahayd filimka intiisa kale, waxaad buul ku dhejisaa summadaas darsin kale oo aad ku daabacdo hal baas.
Inta badan casharrada khadka tooska ah waxay u maleynayaan inaad ka dalbanayso adeegga xaashida tuugada ee dalabka, kaas oo kugu xiraya ballac go'an oo 22-inch ah sababtoo ah taasi waa balladhka duuban ee qalabkoodu isticmaalo. Haddii aad leedahay daabacahaga, xannibaaddaasi way baaba'aysaa - ballaca xaashidaada baandada ayaa si fudud ballaca daabacaaddaada, haddii ay taasi tahay 12", 24", ama 63".
Talaabada 1: Ku dhig Balaadhka Xaashida Gangkaaga iyo daabacahaaga
Kahor intaadan furin software kasta oo nakhshad, xaqiiji ballaca daabacaadda dhabta ah ee daabacahaaga. Go'aankan keli ah ayaa go'aaminaya inta naqshadood ee ku habboon safkiiba iyo sida aad u qorsheyn lahayd qaabkaaga.
| Balaadhka daabacaha | Kiis Isticmaalka Caadiga ah | U Wanagsan |
|---|---|---|
| ~ 300mm (12") | Heerka gelitaanka / daabacayaasha DTF desktop | Calaamado keli ah, dalabyo gaar ah oo-yar, tijaabin qaabaynta ka hor inta aan kor loo qaadin |
| ~ 600mm (24") | Madbacadaha dukaanka mugga dhexe | Go'yaal isku dhaf ah oo gaangis ah - Calaamadaha xabadka, daabacaadaha gacmaha, iyo naqshadaha hore ee buuxa ee hal orda |
| ~ 1600mm (63") | Madbacadaha duubka-lul-la'aanta warshadaha leh feed auto /qaadid | Dhaqdhaqaaqa wax soo saarka mugga sare, daabacaadda wareejinta jumlada, socodka shaqo ee duubista oo joogto ah |
Isku dayga in lagu qasbo qaabka 22"-qaabka daabacaha 12" wuxuu luminayaa wakhti; Isku day inaad ku fikirto dufcad-naqshad kaliya ah oo ah 63" daabacaadda duuban. Naqshad mashiinka aad haysato.
Tallaabada 2: Si sax ah u deji Canvaskaaga
- Qaraarka300 DPI cabbirka daabacaadda kama dambaysta ah - waligaa ha kicin faylka res-hoose si uu ugu habboonaado booska
- Qaabka faylka:PNG ama vector hufan (AI / EPS) - JPGs fidsan oo leh asal cad ayaa daabaca sanduuq cad oo ku wareegsan naqshaddaada
- Habka midabka:CMYK, ma aha RGB - faylasha RGB midabkoodu si aan la saadaalin karin marka la daabaco
- Ballaca shiraac:Isku dhig ballaca daabacaadda saxda ah ee daabacahaaga; dhig dhererka ku salaysan inta saf ee nashqadaha aad buul ka samaysanayso
Talaabada 3: Nakhshad Kooxeed Xajmiga Koowaad
Tani waa tillaabada ay badi kuwa bilawga ahi ka boodaan, waana ta go'aamisa in xaashida baandadaadu ay dhab ahaantii kaydinayso filimka ama ay kaliya dhaqaajiso qashinka.
- Sleeve / daabacado tag:qiyaastii 2 "-3" ballaaran
- Calaamadaha xabadka bidix:qiyaastii 3 "-4" ballaaran
- Naqshado hore / danbe oo buuxa:qiyaastii 10 "-14" ballaaran
Isku dhafka 12 "dabac dhabarka ah oo ku xigta calaamadda 2" ee gacanta ee isku xigta waxay ka tagtaa faraq weyn oo meel dhintay oo ku wareegsan naqshadda yar. U wada naqshado isku mid ah oo saf ah, ka dibna ku buuxi meel bannaan oo run ah oo leh nashqadaha buuxinta yar yar dhamaadka-ma aha si kale.
Tallaabada 4: Buul leh kala dheerayn habboon
- Ka tag0.25"-0.5"Inta u dhaxaysa nashqadaha gaarka ah si ayan budada ruxruxinta iyo habka goynta aysan u dhiigin hal naqshad mid kale
- Ka tag0.5"-1"soohdinta darafka dibadda ee xaashida
- Isticmaal qalabkaaga isku toosinta ee software RIP halkii aad ka ahaan lahayd meelaynta indho-dareenka - farqiga aan iswaafaqsanayn ayaa luminaya filim ka badan inta ay u egyihiin shaashadda.
Talaabada 5: Isku xigxiga daawaynta iyo goynta, ma aha oo kaliya qaabaynta
Heerarka sare, sida aad tahaydalbonaqshadaynta xaashida arrimaha sida ugu badan ee aad u baakadayso. Nashqadaha kooxeed ee la gooyn doono oo la isku cadaadin doono si isku dhow, oo la mid ah naqshadaynta cufnaanta khad (base-cad cad oo culus iyo daabacado midab khafiif ah) oo la kooxeeyay si goobaha daaweynta budada uma baahna hagaajin dhexda.
Khaladaadka Sheet Gang ee Caadiga ah
| Qalad | Maxaa U Xanuunsan |
|---|---|
| Nakhshadeynta DPI khaldan | Cidhifyada pixelated, faahfaahin jilicsan, gaar ahaan qoraalka yar iyo calaamadaha |
| Isticmaalka RGB halkii aad ka isticmaali lahayd CMYK | Midabada ayaa si lama filaan ah u dhexmara shaashadda iyo filimka daabacan |
| Ma jiro kala fogaansho u dhaxaysa naqshadaha | Buundooyinka budada ah ee u dhexeeya naqshadaha, taasoo keenaysa diirka ama cidhifyada dhiig-baxa |
| Isku dhafka cabbirro kala duwan oo hal saf ah | Meel dhintay oo hayn kara naqshad yar oo kale |
| Iska indhatiraya ballaca daabacaadda dhabta ah | Ama margin luntay (qaab aan la qiyaasi karin) ama nakhshado la gooyay (qaabayn ka weyn) |
Lahaanshaha daabacahaagu waxay bedeshaa xisaabta xaashida baandada
Marka aad ka fogaato xaashida gaangiska adeegga baahi-daabacaadda, waxa kugu xidhaya ballacooda go'an, tirada ugu yar ee ay soo dalbadaan, iyo wakhtiga ay soo celinayaan. Markaad daabacdo gudaha guriga, midna caqabadahaas ma khuseeyaan - waxaad ku wadi kartaa xaashida 12 "tijaabada ee hal muunad oo macmiil ah ama 63" duub wax soo saar ah oo loogu talagalay dalabka jumlada, isla socodka shaqada, oo leh eber ugu yaraan iyo soo-jeedin isku maalin ah.
AGP's DTF printer lineup wuxuu daboolayaa tiradan saxda ah: theDTF-T30iyoDTF-E30/E30Tat 300mm ee dufcad yar iyo shaqada muunad, ahDTF-T652/653/654iyoDTF-T656at 600mm wax soo saarka dukaanka maalin kasta, iyoDTF-TK1600at 1600mm la auto-quudinta iyo qaadashada-up for soo saarka duudduuban warshadaha joogto ah. Dhammaan moodooyinka waxay wataan madax daabacado dhab ah oo Epson ah oo leh sahayda khad otomaatiga ah iyo wareegga khad cad, markaa dhinaca khad ee xaashida gaangiska qulqulka shaqadu waxay ahaanaysaa mid joogto ah markaad kor u qaadayso ballaca. Is barbar dhig safka buuxa ee annagabogga daabacaha DTF.
Su'aalaha Inta Badan La Isweydiiyo
Intee in le'eg ayay tahay xaashida baandada DTF?
Waxay ku xidhan tahay ballaca daabacahaaga, ma aha heerka warshadaha go'an. Madbacadaha Desktop-ka (~ 300mm /12") waxay ku habboon yihiin qaab-dhismeedka dufcad-yar ama mid-yar; Madbacadaha dukaanka (~ 600mm /24") ku habboon wax soo saarka maalinlaha ah ee isku dhafan; daabacayaasha duubista warshadaha (~ 1600mm /63") waxay ku habboon yihiin socodsiinta jumlada joogtada ah.
Maxaa DPI ah oo aan u isticmaali karaa xaashida baandada DTF?
300 DPI cabbirka daabacaadda kama dambaysta ah. Wax kasta oo ka hooseeya waxay halis gelinayaan pixelation la arki karo, gaar ahaan qoraalka yar iyo tafaasiisha astaanta wanaagsan.
Intee in le'eg ayaan u dhexeeyaa naqshadaha xaashida baandada?
0.25" ilaa 0.5" inta u dhaxaysa nashqadaha shakhsiga ah, iyo 0.5" ilaa 1" agagaarka cidhifka sare ee xaashida, si looga hortago isku xidhka budada oo loo ogolaado goynta nadiifka ah.
Ma ku qasi karaa cabbirrada naqshadaynta kala duwan hal xaashi baandada?
Haa, laakiin koox isku mid ah nashqado la mid ah si marka hore loo yareeyo booska dhintay, ka dibna u isticmaal meel bannaan oo dhab ah oo loogu talagalay naqshadaha buuxinta yaryar - ha u kala firdhin nashqadaha waaweyn iyo kuwa yaryar si aan kala sooc lahayn xaashida.
Ma u baahanahay software gaar ah si aan u dhiso xaashi gang?
Maya. Photoshop, Illustrator, CorelDRAW, iyo qalabyada bilaashka ah sida Canva ama GIMP dhamaantood way shaqeeyaan, ilaa inta ay taageerayaan cabbirka shiraac ee caadiga ah, daahfurnaanta, iyo qaabka midabka CMYK. Badi software DTF RIP sidoo kale waxaa ku jira qaabeynta aasaasiga ah /qalabka buulka.
Diyaar ma u tahay inaad joojiso dhoofinta xaashida gaangiska?Fiiri tirada daabacaadda DTF ee buuxda ee AGPamahel xigasho-warshadeed toos ahballaca ku habboon mugga wax-soo-saarkaaga.
