Automatic DTF Powder Applicator and Curing Dryer with Intelligent Film Feeding System
The D450 is equipped with automatic correction devices designed to adjust film alignment during feeding. This helps prevent the film from drifting away from its intended path and supports more stable operation.
For DTF printing businesses handling regular roll-film production, automatic correction can reduce the need for repeated manual alignment.
Automatic Film Correction – Reduce Film Misalignment
Keep Film Feeding on Track
Film deviation during processing can affect material handling and interrupt production.
The D450 is equipped with automatic correction devices designed to adjust film alignment during feeding. This helps prevent the film from drifting away from its intended path and supports more stable operation.
For DTF printing businesses handling regular roll-film production, automatic correction can reduce the need for repeated manual alignment.
| Feature | Without Automatic Correction | With D450 Automatic Correction |
|---|---|---|
| Film alignment | Requires more operator attention | Automatic alignment correction |
| Film deviation | May require manual adjustment | Helps correct film positioning |
| Operation | More manual intervention | More automated handling |
| Production workflow | Potential interruptions | Supports stable film transport |
300mm Pre-Heating Section – Prepare Film for Curing
A Dedicated Pre-Heating Area for DTF Processing
The D450 features a 300mm pre-heating section designed to provide an initial heating stage before the film enters the main drying area.
This arrangement creates a more organized heating workflow, allowing the film to pass through separate pre-heating and drying sections.
Combined with the 400mm drying area, it supports a structured powder melting and curing process.
400mm Drying Section – Efficient Powder Curing
A Dedicated Drying Area for Hot-Melt Powder
After the adhesive powder is distributed across the printed film, it needs to be heated until it melts and forms a suitable adhesive layer.
The D450 provides a 400mm drying section equipped with its five-pipe heating system.
The drying section is designed to support the curing stage of DTF production and help prepare printed transfer film for subsequent heat pressing.
